Description
D：150—–Z：6.35-22.23—–B：15.87—–K：20—–α：-5°—–ß：FTG + ATB
CMT thoroughly researched the shortcomings of « standard » dado sets and learned what cabinet makers required most from an « ideal » dado. The result was the superior CMT precision dado, designed with the following features :
– Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material.
– Splinter resistant cuts in veneer plywood, melamine and hard and soft woods.
– Four-tooth chippers that keep the cut flat and virtually free from tear out.
– Shim sets included for cuts between 6,35mm (1/4”) and 22,23mm (7/8”).
Safety precautions : always use both outside blades. Carbide teeth should never come into contact with each other.
| SHIMS SET CONTAINS |
| NO. |
SHIM WIDTH |
| 4 |
0.1mm |
| 2 |
0.2mm |
| 2 |
0.3mm |
| 2 |
0.5mm |
| K |
NUMBER OF REQUIRED INSIDE BLADES |
| mm |
1.6mm |
2.4mm |
3.2mm |
| 6.35 |
0 |
0 |
0 |
| 7.94 |
1 |
0 |
0 |
| 8.73 |
0 |
1 |
0 |
| 9.53 |
0 |
0 |
1 |
| 10.32 |
1 |
1 |
0 |
| 11.11 |
1 |
0 |
1 |
| 11.91 |
0 |
1 |
1 |
| 12.70 |
0 |
0 |
2 |
| 13.49 |
1 |
1 |
1 |
| 14.29 |
1 |
0 |
2 |
| 15.08 |
0 |
1 |
2 |
| 15.88 |
0 |
0 |
3 |
| 16.67 |
1 |
1 |
2 |
| 17.46 |
1 |
0 |
3 |
| 18.26 |
0 |
1 |
3 |
| 19.05 |
0 |
0 |
4 |
| 19.84 |
1 |
1 |
3 |
| 20.64 |
1 |
0 |
4 |
| 21.43 |
0 |
1 |
4 |
| 22.23 |
1 |
1 |
4 |
