Description
D：200—–Z：6.35-20.64—–B：15.87—–K：12—–α：-12°—–ß：FTG + ATB
CMT thoroughly researched the shortcomings of « standard » dado sets and learned what cabinetmakers required most from an « ideal » dado. The result was the precision dado, designed with the following features :
– Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material.
– Splinter resistant cuts in veneer plywood, melamine and soft and hardwood.
– Four two-tooth chippers measuring 3,2mm (1/8”) to keep the cut flat and virtually free from tear out.
– One two-tooth chipper measuring 1,6mm (1/16”) to keep the cut flat and virtually free from tear out.
– Shim sets included for cuts between 6,35mm (1/4”) & 20,63mm (13/16”).
– Ideal for underpowered saws.Safety precautions : always use both outside blades.
Carbide teeth should never come into contact with each other.
| SHIMS SET CONTAINS |
| N0. |
SHIM WIDTH |
| 3 |
0.1mm |
| 2 |
0.2mm |
| 1 |
0.3mm |
| 1 |
0.5mm |
| K |
NUMBER OF REQUIRED INSIDE BLADES |
| mm |
1.6mm |
3.2mm |
| 6.35 |
0 |
0 |
| 7.94 |
1 |
0 |
| 9.53 |
0 |
1 |
| 11.11 |
1 |
1 |
| 12.70 |
0 |
2 |
| 14.29 |
1 |
2 |
| 15.88 |
0 |
3 |
| 17.46 |
1 |
3 |
| 19.05 |
0 |
4 |
| 20.64 |
1 |
4 |
